How do I Stop My DLink Extender From Disconnecting?

Are you having a hard time stopping your DLink WiFi extender from disconnecting? Due to the disconnecting error – you are facing trouble accessing dlinkap/local web address? Yes? Well, you can thank Google for putting you on the right post. Here, we will provide you valuable fixes through which you can easily resolve the issue in a jiffy. Without much delay, let’s get the ball rolling!

[Fixed] DLink Extender Keeps Disconnecting

Here’s how to fix DLink extender keeps disconnecting issue:

Fix 1: Lessen the Distance

Chances are that the distance between your DLink extender and your host router is too much and due to this you are facing the disconnecting issue. No worries – to cope up with the issue, it is suggested to bring your DLink extender and router closer to each other.

Additionally, make sure that the Ethernet connection you have made between your DLink extender and router is secure – stable, and finger-tight. And, if you don’t want to connect your extender and router using wired source – use wireless source instead.

For this – your host router must be WPS-capable. If it is – press the WPS button on it – and then press the WPS button on your DLink extender.

Once you are done, check the connection between them whether it is successful or not by accessing dlinkap/local.

Fix 2: Keep WiFi Interference at Bay

Another effective tip that you can try to fix the issue in discussion – is to keep your DLink extender away from cordless phones -Bluetooth speakers -baby monitors, Alexa devices – gaming console, etc. Doing so will help in improving the extender’s performance and prevent it from disconnecting frequently.

Fix 3: Perform DLink Extender Firmware Update

Performing DLink extender firmware update may also help you to troubleshoot the disconnecting issue easily. So, if you want to make the most out of your DLink extender – and fix the disconnecting issue – update its firmware right away. How? By logging in to DLink extender via dlinkap – accessing the firmware update page – and then following the on-screen instructions.

Fix 4: Restart Your DLink Extender

If the aforementioned hacks bring no help to you – then the only way out to deal with the disconnecting issue is to restart your DL WiFi range extender. Why? Because of technical glitches – and glitches are the most annoying reason causing the disconnecting issue.

To restart your DLink device, follow the instructions outlined underneath:

  • Disconnect all the devices that are connected to your DLink extender.
  • Unplug and power off the extender and wait for 5-10 minutes
  • Plug in back your extender and turn it on.
  • Connect all the disconnected devices to the extender.

We hope that the restarting hack proves helpful?

Fix 5: Change the Location

Bad or improper location of the extender leads to disconnecting issue. So, what you have to do to fix it is to change its present location. Bear in mind – the location you choose for your DLink device must be closer to router – on a higher area, and center-most area in your home. But, you can’t keep the extender inside a cabinet – back of your computer – closer to corners, etc.

Try this hack and your extender won’t disconnect again.

Fix 6: Configure DLink Extender Properly

The troublemaker issue i.e. the disconnecting issue can also be caused due to improper configuration of your Dink extender. So, to get rid of the issue forever – you need to reset your WiFi extender back to factory default values and then perform DLink extender setup process from scratch.

While setting up your DLink device – make sure – your router and your client device i.e. computer or laptop is connected to your WiFi range extender.

Verdict

That’s it! Our article on how to fix DLink extender keeps disconnecting issue ends here. Anticipating that – the hacks we have listed above will help you make the most out of your WiFi extender.

Leave a Reply

Your email address will not be published. Required fields are marked *