Netgear WiFi Extender Not Sending Signals. What to Do?

A Netgear WiFi range extender connects to the router through a wired or wireless mode and amplifies the signals taken. But, there are various instances where users have complained that their Netgear WiFi extenders are not sending signals. As a result, respective users are unable to make the most of their home network and connect their WiFi devices to the internet. If you are also standing among the queue of such users, we have got you covered. This article will shed light on some important tips that you can follow if your WiFi extender is not sending signals and you cannot connect to the internet. So, read on.

You can try accessing the Netgear extender login portal on the device connected to the extender and check whether the internet connection is back or not. However, you have to do that after implementing every troubleshooting technique that we are going to jot down now.

Solutions: Netgear Extender Not Sending Signals

• Check the WiFi Radio Settings: Did you disable the SSID broadcast of your Netgear range extender while accessing its settings? Okay, your extender has a physical button for WiFi radios which you pressed accidentally? Don’t worry! Press it one again and the WiFi connection will be back. Just in case you disabled the SSID broadcast from settings in the lack of a physical WiFi radio button, you should log in to the extender using a wired client device and enable the SSID broadcast from the Settings panel.

• Power Cycle the Extender: There are high chances that the extender is not sending WiFi signals because it has been attacked by anonymous bugs that we generally call technical glitches. Therefore, we suggest you get rid of them by power cycling the range extender. Simply, power down your range extender after disconnecting it from the home router and wait for some time. Once done, connect the range extender back to its respective outlet and then the router. See if the extender starts sending the WiFi signals or not. In case it doesn’t, you are suggested to give a shot at the next technique.

• Eliminate Signal Interference: WiFi signal interference can also be the reason why your Netgear extender is not sending your WiFi signals. Therefore, you should look around for things like cordless phones or microwaves that might be causing the interference. Then, try moving your extender away from them to give it some space. And yes, do you know that water carrying objects can also affect the signal propagation process? Well, water is good conductor of electricity and it has complete ability to absorb the electromagnetic signals emitted by your Netgear range extender. Hence, keep your range extender away aquariums and geysers.

• Take Care of the Extender-Router Gap: When your Netgear extender and router are too far apart, it’s like trying to have a conversation across a crowded room – things get lost in the noise. This distance can disrupt the signal transmission, causing the extender to struggle in sending WiFi signals effectively. To fix it, simply move the extender closer to the router. By reducing the distance between them, you’re giving the extender a clearer signal path, ensuring that it can amplify and extend your WiFi without any hiccups. Yes, try to access the login page by accessing the mywifiext.local URL and see if the problem has been resolved or not.

The Concluding Words

In a nutshell, it can be said that the Netgear extender won’t send WiFi signals due to various reasons. But, in the end, we are being hopeful that after trying the above-give troubleshooting tips, you will be able to craft a way to a whole new improved networking experience.