Resolving Netgear Orbi Red Light: A Troubleshooting Guide

The Netgear Orbi mesh system’s router and satellite have ring and power button LED’s present on them. When this LED light turns red, it is a matter of concern as it can stop you from making most of the home network by disabling some features such as Orbi band steering. Are you also tired of the Netgear Orbi red light issue? If you are, then you should definitely try the tips given in this post. Read on.

Fixed: Netgear Orbi Red Light Issue

Many reasons are there due to which you see the red light on your Netgear Orbi. But, the most primary reason is the supply of improper power. This happens when the router or satellite is connected to a damaged socket. Therefore, you are suggested to perform a physical check of the socket and see if it is damaged. If it is, you should connect your Orbi device to another wall socket and observe whether the light on your Orbi device is still red. If it is, refer to the techniques mentioned below:

1. Restart the Orbi

If the red light on your Netgear Orbi is not ready to bid adieu even after ensuring a stable power supply, there is a probability that it is stuck in a boot loop. To fix the situation, you need to restart the entire Orbi mesh system. Start by powering down the router and then its respective satellites. You just need to press their power buttons and remove them from their respective wall sockets.

Once done, wait for 20 minutes and reconnect them to their corresponding outlets. However, you have to ensure that you are powering up your Orbi satellites after power up the router. Else, the red light problem will keep troubling you.

• Update the Firmware

Sometimes, not the boot loop, but an outdated firmware of the router or satellite can cause the red light issue. Thus, you need to access the orbilogin address and update the firmware of your Orbi device (whichever unit is demanding an update). While you do that, just be certain that you are uploading the correct firmware files. What we mean to say is that do not end up uploading the router’s firmware file on your satellite and vice-versa. Apart from this, you also have to ensure that the firmware file with which you equip your Netgear Orbi router and satellite belongs to the latest version introduced.

Note: After you upload the firmware file, avoid going online or powering down the router or satellite. This might disturb the firmware update process and you won’t be able to complete it in a hassle-free manner.

• Check LAN Connections

Everyone knows that the router connects to the modem via an Ethernet cable whereas the satellites can be connected via the wired or wireless media. So, you should have a look at all the LAN connections. No LAN cable is supposed to be damaged. If you find any, be sure that you replace it with a new one. Apart from this, correct connectors i.e. the LAN ports should have been utilized for the connection. It should be the LAN port of the router and WAN port of the satellite in the case of the router-satellite connection. But, when the deal is about the router and modem connection, you should use the LAN port of the modem and the WAN port of the router. Be sure about creating finger-tight connections in order to avoid internet connection related issues and the Orbi admin login issues at the same time.

To Sum Up

That’s all about what to do in order to resolve the Netgear Orbi red light issue. With the hope that the lights on your Orbi will behave normally, we are now wrapping up.