TechnologyWhy Am I Getting Blinking Purple Light on My...

Why Am I Getting Blinking Purple Light on My Orbi?

-

Struggling with Netgear Orbi blinking purple light? Are you about to perform Orbi factory reset process? If your answer is yes, first, wipe out those worry lines from your forehead because we have got you covered. Second, resetting Netgear Orbi is the last resort. Using the tested and proven hacks provided in this write-up, you will surely be able to troubleshoot “Netgear Orbi blinking purple light” issue. And, if they (the fixes) don’t prove helpful, you can proceed and take the plunge to reset your Netgear Orbi router. Let’s begin, shall we?

Reasons: Orbi Blinking Purple

Before we provide you with fixes to troubleshoot the issue, let us first help you find the actual cause behind it. Keep reading!

  • Maybe your internet connection is causing the issue
  • The distance between your Netgear Orbi router and modem is too much
  • Connectivity issues between Orbi and modem
  • You have used a damaged Ethernet cable for making a wired connection between the modem and Orbi
  • The firmware of your Orbi is corrupted or has become outdated
  • Perhaps your Orbi router is not properly configured that might lead you experience “Netgear Orbi blinking purple light” issue
  • Technical glitches may also affect the performance of your Orbi and also result in purple light issue.

Fixed: Orbi Purple Light Issue

Given below are the troubleshooting tips to resolve “Netgear Orbi blinking purple light” issue at hand. Keep reading!

First, You Need to Reboot Orbi

Rebooting or power cycling is one of the best and effective troubleshooting tips to fix the purple light issue. Here’s how to reboot or power cycle your Orbi device:

  • Right off the bat, turn off your Orbi and also unplug it from the wall socket in which it is plugged in.
  • Wait for some time and then turn it on back again.
  • The LED on your Netgear Orbi router will get blue and stable shortly.

If the power cycling process doesn’t fix the issue for you, move to the next hack and apply it to make the most out of your Netgear Orbi router.

Now, Check the Cable Connection

Another hack you can apply to fix “Netgear Orbi blinking purple light” issue is to check the Ethernet cable you have used for connecting the Orbi device and your internet modem. Ensure that the cable is properly connected and non-damaged. Moreover, also make sure that the cable is connected to the correct ports of your devices.

Still the Same? Update Its Firmware!

An outdated firmware version on your Netgear Orbi router also makes it blink purple. To get the issue fixed and to make the most out of your Netgear Orbi router, update its firmware via orbilogin username and password and orbilogin.net default web address.

Your ISP is the Culprit

One more hack you can try to get rid of “Netgear Orbi blinking purple light” issue is to contact your ISP. Sometimes, slow internet can also force your Orbi to flash purple light. You might be thinking how, don’t you? Look, you have to make an Orbi-modem connection, right? And, connectivity issue is one of the biggest causes behind “Netgear Orbi blinking purple light” issue. So, if you don’t have sufficient internet speed or your modem’s firmware has become outdated, then:

  • First, you will not make the most out of your 
  • Orbi’s internet connection
  • Second, your Orbi will continuously flash purple
  • Third, due to this error, you might bump into one more i.e. Orbi connected but no internet

So, if you don’t want such annoying things to happen, contact your ISP right now. Simply request him to improve your existing internet speed by upgrading your plan, updating your modem, etc.

No Luck? Reconfigure Orbi

At times, purple light on the Netgear Orbi router can be seen due to improper configuration. Need not worry! It is suggested to visit the Orbi setup page and perform the configuration process of your Orbi device again properly.

The Last Words

Now, we are going to end this write-up with the hope that the “Netgear Orbi blinking purple light” issue is now resolved. On the off chance that none of the troubleshooting hacks provided here proved helpful to you, then you can perform Orbi factory reset process. Just press and hold the Orbi’s reset hole, wait for some time, and release it. But, don’t forget to reconfigure Orbi after resetting.

Latest news

Why Can’t I Access Routerlogin.net to Log In to Admin Panel?

While you are trying to access the admin panel of the Netgear WiFi router, you need to use routerlogin.net...

I Can’t Set Up Netgear Router Using Nighthawk App. Help!

I am unable to set up my Netgear Nighthawk router using the Nighthawk app. What should I do? This...

Resolved: Amped Extender Login Password Not Working

Amped wireless range extender has grabbed many eyeballs. This is one of the best networking devices to consider in...

Simple Steps to Fix Netgear Orbi Satellite Not Connecting Issue

Every Netgear Orbi router comes with one or more than one satellites. In order to take full advantage of...

How Can I Set Up My Rockspace Extender?

If you want to perform a Rockspace extender setup in your home and are looking for the best guide then...

How to Setup Linksys Extender in Access Point Mode?

You have done Linksys WiFi extender setup at your home but are not happy with its performance? After doing...

Must read

3 Pros and Cons of Taking on a Plumbing Project Yourself

Many things will cross your mind when you decide...

You might also likeRELATED
Recommended to you