TechnologyMy Nighthawk Router Keeps Losing Connection. What to Do?

My Nighthawk Router Keeps Losing Connection. What to Do?


Nighthawk WiFi routers perform incredibly when it comes to fulfilling the internet requirements of users across the world. But, it has been found that a small percentage of users are experiencing issues with their Netgear routers. However, even from this lot, the frequency of users experiencing intermittent internet connection is too much. If your Netgear Nighthawk router also keeps losing connection every now and then, this post will help you solve the problem.

But, first of all, we want to demystify that an outdated firmware of the router is the topmost reason why you are not able to make the most of it. Therefore, you are required to get it upgraded either with the help of the Netgear Nighthawk app or the web-based management console of the router. However, if you are still experiencing internet in patches, then probably something other might be causing the problem. To know about the cause and its elimination, keep reading.

[Reasons] Nighthawk Router Keeps Losing Connection

As the previous section talked about the existence of other culprits behind the issue, it is time that you get to know what they actually are. Walking through the points outlined below will help you view a broader picture of the cause behind the problem.

  1. Your Router is Overworking

If your Netgear Nighthawk router keeps losing connection, then it’s probably because it is taking more loads than what it is designed for. Maybe you are not allowing it to rest. Know that the more your router overworks, the more the chances that technical glitches affect its performance.

  1. Weak Ethernet Connection

In the event that the Ethernet connection holding your Nighthawk router and the modem is weak, then also you can fall under the category of the users experiencing the issue in discussion. Well, this might occur if the cable used by you is not in the condition of transmitting signals effectively. To be specific, it is damaged.

  1. Too Much WiFi Interference

Experiencing an intermittent internet connection is a common thing if the area in which your Nighthawk router is placed is filled with factors causing WiFi interference. Additionally, the issue might also emerge if the room giving shelter to your wireless router is not properly ventilated.

Got enough knowledge about the reasons forcing you to lose internet access every now and then? Great! Now, you are all set to eliminate the issue from its core. Have a look at the next section and learn what can be done to get the problem resolved. However, the hacks listed below will be equally effective in case your Netgear WiFi not working for you.

[Fixed] Nighthawk Router Keeps Losing Connection

  1. Let the Router Rest

What do you do when you get exhausted? Of course, you take a rest! Well, you need to apply this strategy to your Nighthawk router too. Give it some rest by powering it down for a few minutes. You are free to unplug it from the wall socket. Once you feel that your router has got enough time to rest, power it up again after connecting it to its respective wall socket.

  1. Strengthen the Ethernet Connection

Now, the time has come to change the damaged Ethernet cable with a new one. So, consider using the one that when employed facilitates a higher data transmission rate. However, you must keep one thing in mind using a new cable won’t be able to help you out if the connection is not strong at the ports. For this, the Ethernet port of your modem as well as the Nighthawk router must be working. Additionally, take care of the cleanliness of the router’s Ethernet ports.

  1. Reduce WiFi Interference

Do yourself a favor and change the location of your wireless router. You can keep it in a well-ventilated room. But, the chosen location must be free of heavy electrical equipment like televisions, microwave ovens, refrigerators, treadmills, etc. In addition, Bluetooth devices must also be kept away from your router. If possible, keep the router in the central area of your house. In this manner, the WiFi signal propagation will take place evenly throughout the house.

Bonus Tip: To get the maximum output from your Nighthawk router, consider placing it at a safe distance from the modem. It means it can neither be too less nor too much.

Summing Up

Performing Netgear router setup is a brilliant act that anyone can do to gain access to a limitless internet connection throughout the house. However, if it keeps losing the same, things can turn awry. We hope that the hacks we’ve discussed above will help you fix the internet problem with ease.

Latest news

Why Can’t I Access to Log In to Admin Panel?

While you are trying to access the admin panel of the Netgear WiFi router, you need to use

I Can’t Set Up Netgear Router Using Nighthawk App. Help!

I am unable to set up my Netgear Nighthawk router using the Nighthawk app. What should I do? This...

Resolved: Amped Extender Login Password Not Working

Amped wireless range extender has grabbed many eyeballs. This is one of the best networking devices to consider in...

Simple Steps to Fix Netgear Orbi Satellite Not Connecting Issue

Every Netgear Orbi router comes with one or more than one satellites. In order to take full advantage of...

How Can I Set Up My Rockspace Extender?

If you want to perform a Rockspace extender setup in your home and are looking for the best guide then...

How to Setup Linksys Extender in Access Point Mode?

You have done Linksys WiFi extender setup at your home but are not happy with its performance? After doing...

Must read

3 Pros and Cons of Taking on a Plumbing Project Yourself

Many things will cross your mind when you decide...

You might also likeRELATED
Recommended to you