TechnologyHow to Setup Linksys Extender in Access Point...

How to Setup Linksys Extender in Access Point Mode?


You have done Linksys WiFi extender setup at your home but are not happy with its performance? After doing a lot of research online you got to know that by doing the Linksys access point setup, you can get better WiFi from it. But you are looking for info on how to set up Linksys extender in the access point mode. We get you. We are here to provide you with assistance in this. This is true that after you have set up your Linksys WiFi extender in the access point mode, you will improve the existing WiFi range and speed drastically. Let us help you with the setup process.

Linksys Extender Setup: Prerequisites

Before delving into the setup process of the extender, know what the prerequisites are so that you can get them ready beforehand to avoid any issues later on.

  1. Linksys WiFi range extender

  2. Host router

  3. Stable power supply

  4. High-speed internet connection

  5. Ethernet cable

  6. Admin login details

  7. Computer or laptop

Linksys Extender Setup: Access Point Mode

Follow the instructions that have been provided in the next section to do the Linksys WiFi extender setup in access point mode: Norstrat

  1. Plug the Linksys extender power cable into an active power source.

  2. Toggle the power button to On position.

  3. Let the lights turn solid indicating a fully powered-up extender.

  4. Turn the power supply to the host router on.

  5. Once it is completely booted up, use an Ethernet cable and form a connection between the Linksys WiFi range extender and the host router. Make very sure that the connection is not shaky.

  6. Grab your computer or laptop and power it on.

  7. Use an internet browser and visit to open Linksys login page.

  8. Input the admin login details in the fields on the screen and click on the Login button.

  9. Once you reach the Linksys admin panel, you will be prompted to follow some instructions.

  10. Follow all the instructions carefully and complete the Linksys extender setup in access point mode.

There you go! Linksys extender setup is done.You can now begin enjoying better-quality WiFi from the Linksys extender.

What else can be done by you to further enhance the network quality? Read in the next section.

How to Boost Linksys WiFi Extender Network?

  1. Choose Good Place for Extender

You should place the Linksys WiFi extender in an open place in the home. Also, place it on a higher shelf. Avoid placing it in a congested area and keep it away from other devices or home appliances.

  1. Adjust Antennas

Adjust the Linksys extender’s antennas in such a way that they are pointing towards the accessing devices. This will ensure a clear line of sight from the extender to the accessing devices which means better WiFi.

  1. Update Firmware

This is a known fact that by keeping the firmware updated to the latest version you can enhance the overall performance of your device. So without delaying and without giving it a second thought access the Linksys extender admin panel by using http //  and update the firmware to the most recent version.

  1. Disconnect Extra Devices

With an increase in WiFi demand, it is obvious that there are multiple devices in every home that require WiFi access. But it is important that you keep in mind that you need to get only a limited number of devices to access your Linksys extender network. If you have more than the pre-decided number of devices that are using its network, then the quality will degrade for sure. So we recommend you disconnect some extra devices from the extender network.

  1. Reboot the Extender

You should reboot your Linksys WiFi range extender often to give it some rest. Rebooting is nothing but giving your extender a fresh start. Use the instructions given below:

  • Get closer to your Linksys WiFi extender first.

  • Turn its power button off now.

  • Unplug the power adapter from the power source.

  • Let the device be this way for a couple of minutes.

  • Connect the power adapter to the socket again.

  • Turn on the power button to power up the Linksys extender.

Use this process always to reboot your Linksys WiFi range extender.

Sum Up

In this article, we discussed how to set up a Linksys WiFi range extender in access point mode. You have also learned various ways that will help you improve the WiFi in your home. We are hopeful that you are loving the outcomes of the process that you just tried.

Latest news

Why Can’t I Access to Log In to Admin Panel?

While you are trying to access the admin panel of the Netgear WiFi router, you need to use

I Can’t Set Up Netgear Router Using Nighthawk App. Help!

I am unable to set up my Netgear Nighthawk router using the Nighthawk app. What should I do? This...

Resolved: Amped Extender Login Password Not Working

Amped wireless range extender has grabbed many eyeballs. This is one of the best networking devices to consider in...

Simple Steps to Fix Netgear Orbi Satellite Not Connecting Issue

Every Netgear Orbi router comes with one or more than one satellites. In order to take full advantage of...

How Can I Set Up My Rockspace Extender?

If you want to perform a Rockspace extender setup in your home and are looking for the best guide then...

How to Setup Linksys Extender in Access Point Mode?

You have done Linksys WiFi extender setup at your home but are not happy with its performance? After doing...

Must read

3 Pros and Cons of Taking on a Plumbing Project Yourself

Many things will cross your mind when you decide...

You might also likeRELATED
Recommended to you