If you want to perform a Rockspace extender setup in your home and are looking for the best guide then read this article. Well, performing the installation of extender is not rocket science. You can set up your Rockspace extender on your own. You just need a suitable guide. So, now you don’t need to worry more. This article will discuss how you can log in to the Rockspace extender and set it up with the existing home network. cpc full form
First, we will tell you about the important requirements that you need while setting up the Rockspace extender. Preparing the important thing before the setup will assist you.
Requirements of Rockspace Extender Setup
All the needs are outlined below; you just need to walk through them properly.
-
Constant and reliable power supply.
-
Good speed of the internet.
-
Default password and username.
-
Note down the default web and IP address.
-
Updated internet browser.
-
Quality Ethernet cable.
Hence, these are the things that you need to get ready first so that you can perform the Rockspace extender setup hassle-free. Now let’s dig into the process of extender setup.
Methods to Setup Rockspace extender
You can set up your Rockspace extender by the two most effective methods. The methods are manual method and the WPS button. These two methods are most preferable by the users of Rockspace. Now, first, we start with the manual method.
Rockspace Extender Setup (Manual)
In this method, you need to access the Rockspace Local Login page through the default web address, to complete the extender setup. You can follow the mentioned steps to complete the process:
-
First, you need to unbox your Rockspace extender.
-
Give the fluctuation-free power supply to the extender.
-
Connect the extender and host router with the help of a quality Ethernet cable.
-
Now, power on your computer or laptop.
-
Open the upgraded internet browser.
-
Enter the default IP address into the address bar.
Note: In case you forget the default web and IP address of your device, you can take the assistance of the user manual. You can also search the user manual on Google to get the default web address.
-
Push the Enter button.
-
Now, you will see the Rockspace Local Login panel.
-
Put the default username and password in the on-screen fields.
-
Click on the login button.
-
The Rockspace extender setup wizard will appear on your screen.
-
You need to follow the on-screen prompts to complete the setup process.
Hence, these are the steps that you need to perform to get the Rockspace extender setup successful via the manual method. In case you find this method hard to perform, then you can go with another procedure that we discuss in the next section.
Rockspace Extender Setup (WPS Button)
You can use this method to set up your extender in your home. This method straightforward, you just need to perform a few steps to complete the process. All the steps are explained below. You just need to walk through them carefully.
Note: You can only perform this method in WPS Button authorized models. If you have a WPS model then perform the WPS method.
-
Initially, you need to take the both device closed extender and host router.
-
Locate the WPS button on the extender.
-
Once you find the WPS button, you need to press it.
-
Wait for some time to configure the device successfully.
Thereafter, you can place your extender anywhere in your home according to your choice.
Hence, these are the two suitable methods that you can use to install the Rockspace extender hassle-free.
Conclusion
Now, you can use the services of your Rockspace extender after completing the configuration process. You can get the internet in every cranny and corner of your home. Even in the dead WiFi zone. Now, enjoy the fast blazing speed of the internet in no time. However, if you face any issue related to the extender you can take the help of the user manual. In the user manual, you can get the proper guidance on every issue and will be able to solve the problem related to extender on your own.